NH36 Guide

Note: The NH36 has 3 hands and a day and date complication.

1. Wind the Watch

• Unscrew the watch crown counterclockwise until you feel the crown unthread from the case. This is position 0

• Wind it clockwise away from you about 20-30 times to build up a power reserve.

2. Prime the Watch for Day-Date Setting

• Pull the crown directly away from the case until you fell 2 clicks. This is position 2. Turn the crown clockwise until the watch reads 6:30 or 18:30

• Push the crown back in to position 0.

• Setting the time to 6:30 or 18:30 ensures the day and date wheel are not engaged before you set the day and date. Attempting to set the Day Date Wheels while they are engaged can damage the movement of the watch.

3. Set the Day and Date

• Pull the crown directly away from the case until you feel the first click. This is position 1. 

• Turn the crown counterclockwise to set the date.

• Turn the crown clockwise to set the day.

• To avoid potential damage, always set the time to 6:30 or 18:30 before adjusting the day and date.

4. Set the Time 

• Pull the crown out to the second click. The seconds hand should stop, allowing for precise time setting. Turn the crown to set the local time, being mindful of whether you are setting AM or PM.

5. Securing the Crown

• Push the crown back in to position 0. Screw-down crown, screw it back down to ensure water resistance.